NovelSat NS1000 Modulator

NovelSat NS1000 Modulator - A New Standard for SatelliteA New Standard for Satellite Transmission

NovelSat's NS1000 Modulator delivers industry-leading data rates — up to 358Mbits/sec using 70Msym/sec transmission. NS1000 offers:

Lowest bandwidth consumption – lowering satellite bandwidth usage by 20% and more
Highest throughput – using existing bandwidth
Highest data rate - raising maximum transmitted data rate by over 100%
Smallest dish/HPA size – using the same data rate
Larger footprint – using the same data rates at remote locations

Product Code: NS1000 Modulator

Call for price

Description
Specification

NS1000 Modulator - A New Standard for Broadcast Satellites.

NovelSat’s innovative NS1000 is a state-of-the-art modulator designed forhigh demand satellite transmission. NS1000 is the only system in the marketthat has NS3™ enhancement, delivering significantly higher spectral efficiencycompared to DVB-S2.

The NS3™ system has several marked advantages that set it apart from the competition:
Lower Satellite Bandwidth: Savings of 20% to 78% satellite bandwidth(over available DVB-S2 equipment in the market)
Higher Data Rate: Increases transmitted data rate by over 100% (overavailable DVB-S2 equipment in the market)
Smaller Dish: Reduction of dish size. Achieves the same data rate using asmaller dish

The NS1000 supports high data rates of up to 365Mbps using 70Msps, which enables transmission of one carrier over a 72MHz transponder.

The NS1000 dual-channel option enables any two inputs to be combined simultaneously over one carrier, each with a different modulation scheme using Variable Coding Modulation (VCM), one for each channel. This enables transmission quality that is dependent upon the interface content and the different receivers’ locations.

Dual-channel operation also enables the combination of Ethernet streaming and the ASI interface, easing migration to IP streaming while controlling the QoS of each stream.NS3™ achieves a remarkable data rate improvement of over 36% compared to DVB-S2, when working at high SNR links.

Compatible with the innovative NS3™ protocol
DVB-S, DSNG, DVB-S2 (EN300-421, EN301-210, EN302-307) compliant
Data rates of up to 365Mbps
Powerful pre-distortion algorithmfor saturated channels
Dual-channel mode
L-Band output mode 950MHz-1750MHz (optional extended L-Band 950MHz-2150MHz)
IF output mode 50MHz-180MHz (either L-Band or IF)
Monitor output port10MHz reference (In/Out)
Dual ASI input interface
Dual Ethernet 1Gb input interface
ACM support

NS1000 Modulator Specifications

Output Interfaces
L-Band Output
Connector	SMA (F) 50 ohm
Frequency range	950-1750MHz (optional up to 2150MHz) in 1Hz steps
Power level	-30/0 dBm in 0.1dB steps
Power accuracy/ temp. stability	±0.5dB/±0.5dB
Return loss	>12 dB
Spurious	-55dBc in band and out of band at max. power
Phase noise	@100Hz -70dBc, @1KHz -80dBc, @10KHz -85dBc,
	@100KHz -95dBc, @1MHz -100dBc

IF-Band Output
Connector	BNC (F) 75 Ohm
Frequency range	70MHz±20MHz, 140MHz±40MHz in 1Hz steps
Power level	-30/0 dBm in 0.1dB steps
Power accuracy/ temp. stability	±0.5dB/±0.5dB
Return loss	>12 dB
Spurious	-55dBc in band and out of band at max. power

Monitoring Output
Connector	SMA (F) 50 Ohm
Frequency	Identical to L-Band/IF-Band output frequencies
Power level	-40 dBm
Return loss	> 7dB

10MHz Reference Clock I/O (Optional)
Connector	BNC (F) 50 Ohm
Ref. input power level	-3dBm up to +7dBm
Ref. output power level	+7dBm Typical
Waveform	Sine wave

Baseband
*DVB-S/DSNG*
Inner code	BCH
QPSK	1/2, 2/3, 3/4, 5/6, 7/8
8PSK	2/3, 5/6, 8/9
16QAM	3/4, 7/8
Outer Code	Reed Solomon (203, 188, T=8)
Interleaving	(I=12)
Scrambling Frame length	204, 188

*DVB-S2*
Inner code	BCH
Outer code	LDPC
Code rates and modulation:
QPSK	1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK	3/5, 2/3, 3/4, 5/6, 8/9, 9/10
16APSK	2/3, 3/4, 4/5, 5/6, 8/9, 9/10
32APSK	3/4, 4/5, 5/6, 8/9, 9/10
Frame length	64800, 16200
Baseband ROF	SRRC 20%, 25%, 35%

NS3™
Inner code	BCH
Outer code	LDPC
Modulations	QPSK, 8PSK, 16APSK, 32APSK, 64APSK
Frame length	64800, 16200
Baseband ROF	“SRRC like” 5%, 10%, 15%, 20%, 25%, 35%

Input Interfaces
*ASI Input*
2 ASI interfaces that can function in parallel
Connector	BNC female with 75 Ohm coax
Return loss (22-270 MHz)	18-20 dB
Sensitivity	230 mVpp
Max. input	950 mVpp

*10 MHz Clock*
Stability	±1.5 ppm over 0degC to 50degC
Aging	±1.0 ppm/year

*ASI Output (Loopback)*
Loopback on each ASI input
Connector	BNC female with 75 Ohm coax
Power level	800 mVpp ±10%

*10 MHz Clock – High Stability (Optional)*
Stability	±10 ppb over 0degC to 70degC
Aging	<± 0.5 ppb/day, <± 75 ppb/year

Additional Information
*Monitor and Control Interfaces*
SW interfaces	Command line interface
	Web based graphic user interface
	SNMP V3
	Front panel
Serial RS232/RS485 interface	Female 9-Pin D-Sub connector
Ethernet 10/100	BaseT interface to monitor and control the modulator
Alarm interface	Female 9-Pin D-Sub connector

Optional Interfaces	Dual Ethernet 10/100/1G

*Physical*
Weight	3.5 Kg (7.7 pounds)
Size	19” W x 18” D x 1.75” / 48.3 x 45.7 x 4.45 cm

*Environmental*
Prime power	100-240 VAC, 50-60Hz, 30 Watts Max.
Operating temp.	0 to 50°C
Operating humidity	Up to 85% Non-Condensing
Storage temp.	-40°C to 70°C
Storage humidity	Up to 95% Non-Condensing