Bienvenido a IK Tech Corporation
Su única parada para todas sus necesidades de satélites

Red ETI Tracon GPT 230

Red ETI Tracon GPT 230
  • Las capacidades de rastreo de calor de doble canal permiten el control y monitoreo completo de dos canales separados desde una unidad
  • El punto de ajuste de temperatura ajustable permite un control preciso de una amplia gama de procesos
  • Puede utilizar sensores de temperatura NEC Clase 2 con hasta a 2000 pies de cable para opciones de instalación mejoradas
  • Dos sensores de temperatura de termistor con 20 pies.cables incluidos para aplicaciones de -40 ° F a 230 ° F (-40 ° C a 110 ° C)
  • La entrada RTD permite una mayor precisión y aplicaciones de temperaturas extremas
  • La unidad puede acomodar sensores RTD con configuración de 2, 3 o 4 cables
  • Visualización de la temperatura para un ajuste y un seguimiento precisos
  • Cargue la pantalla actual para un ajuste y monitoreo precisos
  • Tierra visualización de corriente de falla para monitoreo, protección y alarma precisos
  • Umbrales de alarma ajustables para exceso de corriente de falla a tierra, corriente de carga y temperatura
  • Alarmas indicadas con display de panel y contacto de relé para señalización remota
  • Una configuración de modo de falla que se puede configurar para energizar o desenergizar los calentadores durante una falla del sensor
  • El modo de protección contra incendios mantiene el funcionamiento del calentador para su uso en sistemas críticos de protección contra incendios
  • La carcasa NEMA 4X IP66 resistente a la intemperie duradera permite la instalación en interiores o exteriores
  • Código: Tracon GPT 230
    The GPT 230 Dual Channel Heat–Trace Control is a dual–point microprocessor–based heat–trace control thermostat. It is ideal for applications which require two independent heater–control Channels with Ground–Fault Equipment Protection (GFEP). Ideal uses include freeze protection, hot water temperature maintenance, grease line trace, tank heating, and other temperature monitoring and control applications.

    • Adjustable Temperature Setpoint and Alarms Sensor Inputs
    • Precision Monitoring and Control
    • Ground–Fault Equipment Protection
    • Automatic GFEP Circuit Self–Test
    Environmental
    Area Of Use Non-hazardous Locations
    Operating Temperature Range −40 °F to 122 °F (−40 °C to 50 °C)
    Enclosure
    Dimensions 9.0″ (W) 12 4/5″ x (H) x 5 9/10″ (D)
    229 mm (W) x 325 mm (H) x 150 mm (D)
    Protection NEMA 4X, IP66
    Cover Attachment Polycarbonate cover
    Cable Entries

    Two liquid-tight cable glands installed for Two liquid-tight cable glands installed for sensor and alarm leads, cable diameter 0.08” to 0.24” (2 mm to 6 mm)

     

    Two 1.046″ holes to accommodate ¾” conduit fittings for power wiring connections

    Material Polycarbonate
    Weight 5.8 lb. (2.63 kg)
    Mounting Wall mount with flanges
    Wiring Terminal Ratings
    Power Barrier Strip Terminals for Line, Neutral, and Ground; use 10 AWG wires rated for at least 194 °F (90 °C)
    Sensors Terminal Block, rising cage clamp, 12–28 AWG leads
    Alarm Relay Terminal Block, rising cage clamp, 12–28 AWG leads
    User Interfaces
    Pushbuttons UP, DOWN, ENTER, TEST / RESET BACK
    DIP Switches RTD wiring configuration
    Panel lockout
    Parameter Settings For Each Zone
    Temperature Setpoint Heat ON Adjustable −99.9 °F to 999 °F (−73.3 °C to 537.7 °C)
    Temperature Setpoint Heat OFF Adjustable −99.9 °F to 999 °F (−73.3 °C to 537.7 °C)
    Low–Temperature Alarm Threshold −99.9 °F to 999 °F (−73.3 °C to 537.7 °C)
    Default 35 °F (−1.7 °C)
    Low–Temperature Alarm Delay 0 s to 3000 s 0 s to 3000 s
    Default 300 s
    High–Temperature Alarm Threshold −99.9 °F to 999 °F (−73.3 °C to 537.7 °C)
    Default 140 °F (60 °C)
    High–Temperature Alarm Delay 0 s to 3000 s
    Default 300 s
    Low–Current Alarm Threshold 0.0 A to 10.0 A
    Default 0.1 A
    Low–Current Alarm Delay 0 s to 300 s
    Default 5 s
    High–Current Alarm Threshold 0.0 A to 55.0 A
    Default 30.0 A
    High–Current Alarm Delay 0 s to 600 s
    Default 300 s
    Ground Fault Limit Current 1.0 mA to 300.0 mA
    Default 30 mA
    Self–Test Interval 1 h to 250 h when enabled
    Default 24 h
    Temperature Unit °F or ° C
    Default °F
    Indicators
    Status Indicator

    Power (Green)

    Heater (Yellow)

    Low Temperature (Blue)

    Summary Alarm (Red)

    Display 27″ OLED graphic 128×64
    Summary Alarm Relay Reporting

    Low temperature

    High temperature

    Low load current

    High load current

    High ground fault current

    Stuck relay

    Sensor fault

    Internal fault

    Control Ratings
    Temperature Accuracy +/− 2 °F (1 °C)
    Temperature Sensors
    Temperature Inputs (Included) Two Thermistors: 100k ohms at 25 °C,
    range −40 °F to 230 °F (−40 °C to 110 °C),
    20ft Lead (25076)RTD Sensor: Platinum,
    Alpha = 0.00385, ITS–90,
    100 ohms at 0 °CInput supports
    2–wire, 3–wire, or 4–wire connection
    Sensor operates at 1 mA
    (GFEP) Ground–Fault Equipment Protection
    Range Adjustable 1mA to 300 mA
    Default 30 mA +/- 2%
    Automatic Self Test Verifies GFEP functionality every 24 hr., when the load is turned on, and when there is a load supplied
    Power
    Supply Voltage 100 – 277 V ac 50/60 Hz
    Controller Power Consumption 5 W maximum, 2 W idle
    Load Rating 30 A, 100 – 277 V ac resistive

    ORDERING INFORMATION

    Order Number Description
    25171 Tracon MODEL GPT 230 Dual-Point General Purpose Heat–Trace Control
    25076 Temperature Sensor (included)
    25300 GPT 230 Installation Sheet
    25167 GPT 230 Installation and Operation Manual