| 
 TYPICAL SPECIFICATIONS 
 | 
|   | 
  | 
| RF Frequency | 
12.20 to 12.75 GHz | 
| IF           Frequency | 
950 MHz           to 1,500 MHz | 
| Local           Frequency | 
11.25 GHz | 
| Input Interface | 
Waveguide, WR75 (with Groove) | 
| Output Interface | 
N-type, female (50 ohm) | 
  | 
F-type, female (75 ohm) | 
| Noise Figure (Ta.: +25 C) | 
0.8 dB typ., 1.0 dB max. | 
| Linear Gain (Ta.: +25 C) | 
60 dB typ., 55 dB min. | 
|   | 
  | 
| Requirement for External Reference ▼ | 
  | 
| Input Port | 
IF Output connecter | 
| Frequency | 
10 MHz (sine-wave) | 
| Input Power | 
-10 to 0 dBm @ Input port | 
|   | 
  | 
| Phase Noise | 
  | 
| @ 100 Hz | 
-135 dBc/Hz max. | 
| @ 1 kHz | 
-143 dBc/Hz max. | 
| @ 10 kHz | 
-145 dBc/Hz max. | 
|   | 
  | 
| L.O. Phase Noise | 
  | 
| @ 100 Hz | 
-75 dBc/Hz max. | 
| @ 1 kHz | 
-80 dBc/Hz max. | 
| @ 10 kHz | 
-85 dBc/Hz max. | 
| @ 100 kHz | 
-95 dBc/Hz max. | 
|   | 
  | 
| Leakage Level | 
  | 
| at the IF Output Connector | 
-25 dBm max. | 
| at the RF Input Flange | 
-60 dBm max. | 
|   | 
  | 
| Spurious | 
  | 
| Fixed frequency spur,  unrelated to test CW signal (Measured at specified IF band). | 
-140 dBm max.at input
  | 
| With test CW signal -10 dBm IF output (Measured at specified IF band). | 
-55 dBc max. | 
|   | 
  | 
| Input V.S.W.R. | 
2.5 : 1 typ. | 
| Output V.S.W.R. | 
2.3 : 1 typ. | 
| Power Requirement | 
+24 VDC (+12 to +24 VDC) | 
| Current Drain | 
200 mA max. | 
|   | 
  | 
| Mechanical & Environmental ▼ | 
  | 
| Temperature Range (ambient) | 
-40 to +60 C (operating)  -40 to +80 C (storage) | 
Dimension & Housing   (without Interface Connectors) | 
100.5 mm (L) x 40 mm (W) x 40 mm (H)   [3.96" (L) x  1.57" (W) x 1.57" (H)] | 
| Weight | 
260 g [0.57 lbs] |