|
TYPICAL SPECIFICATIONS
|
| |
|
| RF Frequency |
10.95 to 11.70GHz |
| IF Frequency |
950 MHz to 1,700 MHz |
| Local Frequency |
10.00 GHz |
| Input Interface |
Waveguide, WR75 (with Groove) |
| Output Interface |
N-type, female (50 ohm) |
|
F-type, female (75 ohm) |
| Noise Figure (Ta.: +25 C) |
0.8 dB typ., 1.0 dB max. |
| Linear Gain (Ta.: +25 C) |
60 dB typ., 55 dB min. |
| |
|
| Requirement for External Reference ▼ |
|
| Input Port |
IF Output connecter |
| Frequency |
10 MHz (sine-wave) |
| Input Power |
-10 to 0 dBm @ Input port |
| |
|
| Phase Noise |
|
| @ 100 Hz |
-135 dBc/Hz max. |
| @ 1 kHz |
-143 dBc/Hz max. |
| @ 10 kHz |
-145 dBc/Hz max. |
| |
|
| L.O. Phase Noise |
|
| @ 100 Hz |
-75 dBc/Hz max. |
| @ 1 kHz |
-80 dBc/Hz max. |
| @ 10 kHz |
-85 dBc/Hz max. |
| @ 100 kHz |
-95 dBc/Hz max. |
| |
|
| Leakage Level |
|
| at the IF Output Connector |
-25 dBm max. |
| at the RF Input Flange |
-60 dBm max. |
| |
|
| Spurious |
|
| Fixed frequency spur, unrelated to test CW signal (Measured at specified IF band). |
-140 dBm max.at input
|
| With test CW signal -10 dBm IF output (Measured at specified IF band). |
-55 dBc max. |
| |
|
| Input V.S.W.R. |
2.5 : 1 typ. |
| Output V.S.W.R. |
2.3 : 1 typ. |
| Power Requirement |
+24 VDC (+12 to +24 VDC) |
| Current Drain |
200 mA max. |
| |
|
| Mechanical & Environmental ▼ |
|
| Temperature Range (ambient) |
-40 to +60 C (operating) -40 to +80 C (storage) |
Dimension & Housing (without Interface Connectors) |
100.5 mm (L) x 40 mm (W) x 40 mm (H) [3.96" (L) x 1.57" (W) x 1.57" (H)] |
| Weight |
260 g [0.57 lbs] |