| 
 TYPICAL SPECIFICATIONS 
 | 
|   | 
  | 
| RF Frequency | 
(Universal           Ku-band)  | 
| Low Band: | 
10.7 to           11.7 GHz | 
| High Band: | 
11.7 to           12.75 GHz | 
|   | 
  | 
| IF           Frequency | 
  | 
Low Band:
  | 
950 to           1,950 MHz | 
High Band:
  | 
1,100 to           2,150 MHz | 
|   | 
  | 
| Local           Frequency | 
  | 
Low Band:
  | 
9.75 GHz
  | 
High Band:
  | 
10.6 GHz | 
|   | 
  | 
| Local Stability | 
+/- 10 ppm ( 100 kHz typ. ) | 
| Input Interface | 
Waveguide, WR75 (with Groove) | 
| Output Interface | 
F-type, female (75 ohm)
  | 
| Noise Figure (at +25 C) | 
0.8 dB typ. | 
| Linear Gain (Ta.: +25 C) | 
48 dB min., 62 dB max. | 
|   | 
  | 
| L.O. Phase Noise (SSB) | 
  | 
| @ 100 Hz | 
-50 dBc/Hz max. | 
| @ 1 kHz | 
-70 dBc/Hz max. | 
| @ 10 kHz | 
-75 dBc/Hz max. | 
| @ 100 kHz | 
-85 dBc/Hz max. | 
|   | 
  | 
| L.O. Leakage Level | 
  | 
| at the IF Output Connector | 
-40 dBm max. | 
| at the RF Input Flange | 
-60 dBm max. | 
|   | 
  | 
| Spurious | 
  | 
| Fixed frequency spur,  unrelated to test CW signal (Measured at specified IF band). | 
-120 dBm max.at input
  | 
| With test CW signal -10 dBm IF output (Measured at specified IF band). | 
-40 dBc max. | 
|   | 
  | 
| Input V.S.W.R. | 
2.5 : 1 typ. | 
| Output V.S.W.R. | 
2.3 : 1 typ. | 
| Power Requirement | 
+24 VDC (+12 to +24 VDC) | 
| Current Drain | 
200 mA max. | 
|   | 
  | 
| Mechanical & Environmental ▼ | 
  | 
| Temperature Range (ambient) | 
-40 to +60 C (operating)  -40 to +80 C (storage) | 
Dimension & Housing   (without Interface Connectors/Switches) | 
83.4 mm (L) x 42 mm (W) x 42 mm (H)  [3.28" (L) x 1.65" (W) x 1.65" (H)] | 
|   | 
  | 
| Weight | 
240 g   [0.53 lbs] |