欢迎来到 IK Tech Corporation
一站式满足您所有的卫星需求

NJT5017L新的日本电台的Ku波段4W块上变频器(比克的巴克)N型连接导致的版本

NJT5017L新的日本电台的Ku波段4W块上变频器(比克的巴克)N型连接导致的版本

NJRC NJT5017L Ku-Band 4W Block Upconverter (BUC) N-Type Connector LED Version

IKtechcorp is the distributor for New Japan Radio Company (NJRC), a leading manufacturer and supplier of commercial satellite equipment. NJRC/ JRC offers a wide range of Block Up Converters (BUCs), Low Noise Blocks (LNBs) and Low Noise Amplifiers (LNAs)

 

RF Frequency
  RF Output Frequency: 14.0-14.5 GHz.
   
High Efficiency Output Power (P1dB):
  4W (+36 dBm min.)
   
Low Distortion (ACPR):
  IM3: -28 dBc @ Pout = +36 dBm
   
Small Size & Light Weight
Lower Power Consumption
RoHS Compliance
LED Indicator
NJT5017FL Type F Connector | NJT5017L Type N Connector
型号: NJT5017L
$575.00

NJRC NJT5017L Ku-Band 4W Block Upconverter (BUC) N-Type Connector LED Version

 
 
Summary

For more than 50 years, NJRC has kept their position as the leading manufacturer of Microwave Components in the market worldwide. NJR BUCs and LNBs have set the standards in price, performance and reliability for many years. All of the NJRC Microwave Components supplied are of JAPAN origin. All NJRC BUCs and LNBs, etc feature the RoHS compliance.

 

Summary of Features:  
   
RF Frequency 14.0 to 14.5 GHz (Standard Ku-Band)
Output Interface Waveguide, WR75 (with Groove)
Input Interface N-type, female (50 ohm) [Model No.: NJT5117N]
F-type, female (75 ohm) [Model No.: NJT5117F]

Output Power @ 1dB G.C.P. +36 dBm min. over temperature
Linear Gain 56 dB min.
Power Requirement +15 to +24 VDC 50 W max.
Power Consumption 50W max.
Weight 2.3 kg max. [5.1 lbs]
LED Indicator (* only NJT5017L/17FL) Green: LO locked
RED: LO unlocked (or no 10MHz reference signal)
   
Technical Specifications Diagram  
See "Technical Specifications" Tab

NJRC NJT5017L Ku-Band 4W Block Upconverter (BUC) N-Type Connector LED Version

TYPICAL SPECIFICATIONS

   
RF Frequency 14.0 to 14.5 GHz (Standard Ku-Band)
Local Frequency 13.05 GHz
IF Frequency 950 - 1450 MHz
Output Power @P1dB 4W (+36 dBm min.)
Output Interface Waveguide, WR75 (with Groove)
Input Interface F-type Female (75 ohm)
Output Power @ 1 dB G.C.P.  
    @ +25 C
    over temperature
+36 dBm min. @+25 C
+36 dBm min. over temperature
Linear Gain 56 dB min.
ACPR Compliance with IESS308/SSOG -28 dBc @ Pout = +36 dBm
   
Requirement for External Reference  
Frequency 10 MHz (sine-wave)
Input Power -5 to +5 dBm @ Input Port
   
Phase Noise  
@ 100 Hz -125 dBc/Hz max.
@ 1 kHz -135 dBc/Hz max.
@ 10 kHz -140 dBc/Hz max.
   
L.O. Phase Noise  
@ 100 Hz
-60 dBc/Hz max
@ 1 kHz
-70 dBc/Hz max
@ 10 kHz
-80 dBc/Hz max
@ 100 kHz -90 dBc/Hz max
   
Input V.S.W.R. 2.0 : 1 max
Output V.S.W.R. 2.0 : 1 max
Power Requirement +15 to +24 VDC
Power Consumption 50 W max.
Mute Shut off the HPA in case of L.O. unlocked
LED Indicator (* only NJT5017L/17FL) Green: LO locked
RED: LO unlocked (or no 10MHz reference signal)
   
Mechanical & Environmental  
Temperature Range (ambient)  
    Operating
    Storage
-40 to +55 C
-40 to +75 C
Dimensions & Housing (L x W x H)
(without Interface Connectors)
186.4mm (L) x 167mm (W) x 73 mm (H) max.
-[7.33” (L) x 6.57” (W) x 2.87” (H)]
Weight 2.3 kg max. [5.1 lbs]