SMW Quad-link Fiber System Transmitter
特點
- 頻率範圍 10.70-12.75 GHz
- 提供多種 LO 頻率
- LO 切換電壓和/或 22kHz
- 在內部參考之間進行選擇。或外部參考。輸入模型
- 低相位噪聲，滿足 DVB-S2X 的 VSAT 配置文件
- 高 P1dB 和 IP3
- 可作為 H/V 接收的 TWIN 提供
- 體積小、重量輕
- 工作溫度範圍廣
Features
- 4x L-band forward channels + 10MHz return channel over a single fiber using a direct modulated 1550 nm
- _x000D_ laser and CWDM – Coarse Wavelength Division Multiplexing.
- AGC – Automatic Gain Control and optional Fixed Gain for large antennas and Beacon applications.
- Up to 40 km depending on link budget with very high C/N maintained.
- High P1dB and IP3
Fully outdoor proof
- Both the transmitter and the receiver unit packaged in a compact outdoor rugged aluminium enclosure.
- -40° to +80°C fully operating temp range.
Versatility
- 4 x L-band fibre link in any direction simply by swapping location of the receiver/transmitter pair.
- Carries any 290 – 3000 (Opt. 50 – 2750) MHz RF signal – Satcom, Terrestial TV, GPS, FM etc
- Ideal to mount on the satellite antenna or structure, without using a bulky separate outdoor enclosure.
- Built in Bias-tees and 10MHz ref diplexer.
- Available with custom options.
Applications
- Single fiber connection to one Quattro LNB equipped satcom antenna
- Single fiber connection to 4 separate single or multiband LNB’s
- Single fiber connection to multiband or multiple BUC’s
Additional information
| RF frequency: | 290-3000 MHz, 50-2750 MHz |
|---|---|
| RF Connector: | F, N, SMA |
| 10 Mhz ref: | SMA, None, Other |
| AGC: | On, Off (Beacon) |
| Options: | AGC off (Beacon), DC connector type, 10 MHz connector type, No LNB DC supply, 50 – 2750 MHz RF freq. range |
| DC out RF connectors | Yes, No, Other |
Drawing
