VIKING ASC 300-LW Récepteur de signaux de Balise, Bande L (930 MHz à 2300 MHz)

Récepteur de balise VIKING ASC 300-LW, bande L (930 MHz à 2300 MHz)

Code produit: VIKING_ASC300-LW

VIKING ASC 300-LW Beacon Receiver, L Band (930 MHz to 2300 MHz)



Summary
VIKING ASC 300-LW Beacon Receiver, L Band (930 MHz to 2300 MHz) The Model ASC 300LW Beacon Receiver is a high performance unit that is designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The proprietary "SWEEP TRAC" option provide signal tracking capability for higher drift LNB's. The applications for the ASC300-LW are for antenna step track controlling and uplink power control systems. VIKING ASC 300-LW Feature: • L Band Satellite Beacon Receiver • Input Frequency: 930 MHz to 2300 MHz • Ethernet and Continuous Digital Streaming Options • Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. • Applications: Antenna Tracking Controllers/Uplink Power Controllers

VIKING ASC 300-LW Beacon Receiver, L Band (930 MHz to 2300 MHz)

SYSTEM SPECIFICATIONS

Input Frequency	930 MHz to 2300 MHz
Pre-detection Bandwidth	60 kHz Standard
Input Level	-90dBm, minimum; -30dBm, maximum For full tracking range capability
Frequency Tuning	10 kHz Steps
Frequency Adjust	Front Panel or Remotely
C/N0	<45 dB-Hz for capture
AFC (Note 1)	+ 30 kHz
Image Rejection	>40dB, 950 to 2300 MHz
Input Impedance (Note 2)	75 Ohm
Input Connector (Note 2)	Type-F, Female
Output Impedance	100 Ohm, single ended
Output Connector	Terminal plug and BNC Female
Tracking Gradient	0.5 V/dB
Tracking Response	0 to +10 VDC for a 20 dB input level change
System Level Range	60 dB
System Level Adjust	0 to 60dB, 0.5 dB Steps
Frequency Stability	< 1 ppm, 0C to +50 C
Frequency Reference	10 MHz (Internal)
Phase Noise	>75 dB-Hz, 1 kHz from Carrier
Alarms	Unit Lock
Alarm Relay	Form-C
External LNB Power	.+18 VDC, switchable In-Out,500 ma,max.(STD)
CDS (OPTIONAL)	RS-232 or RS-422 DB-9 female connector on rear
Front Panel Display	Vacuum Fluorescent
M & C	RS-232 or RS-422/485 Switchable on rear panel
M & C Connector	DB-9, Female on rear
Ethernet 10/100 Base T	(OPTIONAL) Not installed on STD unit For Ethernet Specifications
Ethernet Connector	RJ-45 on rear

MECHANICAL SPECIFICATIONS

Size	1.75" H X 16.00" D X 19.00" W
Weight	8lb. (3.63 kg)
Primary Power	90 - 264 VAC 47 - 63Hz, 1.4 A Auto-Sensing

ENVIRONMENTAL PERFORMANCE

Operating Temperature	0c to +50 c
Storage Temperature	-40c to +70 c
Humidity	95% RH @ 40 c

NOTES

*NOTE 1*	Up to + 100kHz with proprietary "SWEEP-TRAC" automatic frequency capture. Customer specified tracking range. Less than 6 seconds capture time at + 100kHz tracking
*NOTE 2*	50 Ohm N Female or SMA Female available at No Charge. Call or Email Us
*NOTE 3*	Other voltages are available for the ASC300LW beacon receiver such as + 24 & +15 VDC

CDS Continuous Digital Streaming Option:
The streaming option associated with the ASC300LW Beacon Receiver provides a continuous, two byte, data stream running at 9600 baud that contains twelve bits of signal strength level indication as well as lock or alarm condition of the unit. Other baud rates are available. A female DB9, interface connector on the rear of the unit is specifically dedicated for this option.

Ethernet Option: Not installed on STD Units. Must be installed at factory.
Software Support: Windows 98/2000/XP/2003/VISTA/7 32bit & 64bit
Protocol: TCP/IP, UDP, HTTP, SNMP, ARP, Telnet, ICMP, BOOTTP, DHCP, SMTP

Technical Specifications Diagram

VIKING ASC 300LW Beacon Receiver, L Band (930 MHz to 2300 MHz) Product Picture, Price, Image, Pricing

Compliance Standard

Inquire

VIKING ASC 300-LW Beacon Receiver Datasheet (409.48KB)