VIKING ASC 300KUE-T Ku-Band Satcom Récepteur de signaux de Balise - Tri Bande Élargie (de 10,7 à 12,75 GHz)

Viking ASC 300KUE-T Ku-Band Satcom Beacon Receiver - Tri Band Extended (10,7 à 12,75 GHz)

Viking SATCOM est l'un des principaux fabricants et distributeurs d'antennes commerciales de communication par satellite en réception uniquement. Viking Satcom propose une approche « One Stop Shop » en proposant et en fournissant des antennes satellites à la pointe de la technologie. Une gamme complète de produits, de systèmes de communication et d'accessoires est disponible à des prix abordables.

Code produit: VIKING_ASC300KUE-T

Appelez pour les Prix

VIKING ASC 300KUE-T Ku-Band Satcom Beacon Receiver - Tri Band Extended (10.7 to 12.75 GHz)



Summary
VIKING ASC 300KUE-T Ku-Band Satcom Beacon Receiver - Tri Band Extended (10.7 to 12.75 GHz) The Model ASC300KuE-T Beacon Tracking Receiver is a high performance self-contained unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The ASC300KuE-T Beacon Receiver will tune over the three primary Ku band satellites (10.7-11.70 GHz, 11.70 – 12.20 GHz, 12.25 – 12.75 GHz). VIKING ASC 300KUE-T Feature: • Ku Band Satellite Beacon Receivers - Tri Band Extended • Input Frequency: 10.7 to 12.75 GHz • Ethernet and Continuous Digital Streaming Options • Designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. • Applications: Antenna Tracking Controllers/Uplink Power Controllers

VIKING ASC 300KUE-T Ku-Band Satcom Beacon Receiver - Tri Band Extended (10.7 to 12.75 GHz)

SYSTEM SPECIFICATIONS

Input Frequency	10.7 to 12.75 GHz
Pre-detection Bandwidth Other Bandwidths Available	60 kHz Standard
Input Level	-90 dBm, minimum; -30 dBm, maximum For full tracking range capability
Frequency Tuning	10 kHz Steps
Frequency Adjust	Front Panel or Remotely
Frequency Stability	<1 ppm,0c to +50c
AFC	+30 kHz
Threshold	<45 dB-Hz (C/N0) for acquisition
Input Impedance	50 Ohm
Input Connector	Type-N, Female Std. (SMA Optional)
Output Impedance	100 Ohm, single ended
Output Connector	Terminal Plug and BNC Female
Tracking Gradient	0.5 V/dB, Standard
Tracking Response	0 to +10 VDC for a 20 dB input level change
System Level Adjust	0 to 60dB
Frequency Reference	10 MHz (Internal)
Phase Noise	>75 dBc-Hz, 1 kHz from Carrier
Alarms	Unit Lock, LNB Power
Alarms Relay	Form-C
External LNB Power	No External LNB Power
CDS (OPTIONAL)	RS-232 or RS-422 DB-9 female connector on rear
Front Panel Display	Vacuum Fluorescent
M & C	RS-232 or RS-422/485 Switchable on rear panel
M & C Connector	DB-9, Female on rear
Ethernet 10/100 Base T	(OPTIONAL) Not installed on STD unit
Ethernet Connector	RJ-45 on rear

MECHANICAL SPECIFICATIONS

Size	1.75" H X 16.00" D X 19.00" W
Weight	14 lb. (6.35 kg)
Primary Power	90 - 264 VAC, 47 - 63 Hz, 1.4A Auto-Sensing

ENVIRONMENTAL PERFORMANCE

Operating Temperature	0c to +50 c
Storage Temperature	-40c to +70 c
Humidity	95% RH @ 40 c

NOTES

CDS Continuous Digital Streaming Option:
The streaming option associated with the ASC300 series of beacon tracking receivers provides a continuous, two byte, data stream running at 9600 baud that contains twelve bits of signal strength level indication as well as lock or alarm condition of the unit. Other baud rates are available. A female DB9, interface connector on the rear of the unit is specifically dedicated for this option.

Compliance Standard

Inquire

VIKING ASC 300KUE-T Beacon Receiver Tri Band Extended Datasheet (357.05KB)