欢迎来到 IK Tech Corporation
一站式满足您所有的卫星需求

Foxcom Gold GL 7220 RF Optical DownLink L-Band [950-2220MHz], 4dB Optical Budget

Foxcom Gold GL 7220 RF Optical DownLink L-Band [950-2220MHz], 4dB Optical Budget

Foxcom Gold GL 7220 RF 光下行链路 L 波段 [950-2220MHz],4dB 光预算

IKtechcorp is Foxcom Communications Fiber Optic Systems 的分销商,是商业卫星设备的领先制造商和供应商。Foxcom 提供广泛的光纤链路,用于 VSAT、DTH、COTM、电信、电缆和广播行业。卫星、DTH、VSAT、光纤、光纤、射频。”/></p> • 针对下行链路应用进行了优化<br /> • 10Km 传输距离<br /> • 可选 AGC/MGC<br /> • 前面板测试端口<br /> • 可选 LNB 供电<br /> •强大的监控功能<br /> • 兼容所有第一代卫星光产品</div>
                
                <div class=

型号: Foxcom_GL7220

Foxcom Gold GL 7220 RF Optical DownLink L-Band [950-2220MHz], 4dB Optical Budget

Foxcom Gold GL 7220 RF Optical DownLink L-Band [950-2220MHz], 4dB Optical Budget
 
Summary

Foxcom Gold GL 7220 RF Optical DownLink L-Band [950-2220MHz], 4dB Optical Budget

Foxcom's Sat-Light/Gold L-Band Interfacility Link offers a high performance, cost effective alternative to conventional coaxial-cabled systems. The Gold L-Band IFL covers the range of 950 to 2200MHz. The Gold Series L-Band link is designed for a wide range of satellite uplinking facilities whereby high input power levels are required. Foxcom’s high dynamic range DFB laser delivers exceptional signal quality for the most demanding applications.

The new Gold series is compatible with first generation Sat-Light 7000 Series platform. The Gold Series support L-Band, 70/140MHz IF, Wide Band (10-2200 MHz), 10MHz Reference, Redundancy, M & C, SNMP, Ethernet, and Serial Data Communication.

The link consists of an optical transmitter, which receives the RF signal from an LNB or LNA, and an optical receiver that connects to the indoor receive equipment. All satellite modulation schemes are accommodated –digital or analog. Inherently low phase is achieved by direct modulation of the laser diode.

 

     
Order Diagram - Options    
Foxcom Gold Series Order Diagram - Options

Foxcom Gold GL 7220 RF Optical DownLink L-Band [950-2220MHz], 4dB Optical Budget

 


RF Specifications Units Typical Minimum Maximum
         
Frequency Range MHz 950-2200MHz    
Link Gain dB Adjustable -10 +10
Amplitude Response @ Unity Gain
950-2150MHz
any 36 MHz
dB
±2
±0.25
 
±2.2
±0.3
Gain Stability dB/24hr ±0.25   ±0.3
SFDR1 dB/Hz2/3 103 100  
CNR [any 36 MHz]1 dB 60 55  
Noise Figure (NF)1 dB 22   21
Output IP3 (OIP3) 2 dBm +5 0  
Third Order InterModulation [IMD]3 dBc Adjustable 55 30
Group Delay Variation- linear
950 - 2150MHz
ns
4
  5
Input Signal Range - Total Power7 dBm   -45 -20
Output Signal Range - Total Power dBm   -45 -20
Maximum Input without Damage dBm   +15  
Input/Output Impedance 75 or 50      
TX/RX Input/Output return loss
50 Ohm
75 Ohm
dB
-14
-12
 
-14
-12
RF Connector Type
Input/Output
Test Port
  F, SMA
BNC
   
Test Port [front panel sample port]10 dB -20 -22 -18
         
         
Optical Specifications Unit Typical Minimum Maximum
         
Optical Power Output dBm 3 1 4
Optical Budget / Distance
4 dB optical budget
dB/Km 1310 nm | 1550 nm
8 |15
   
Optical Connector Types   FC/APC or SC/APC    
Optical Wavelength nm 1310/1550/CWDM    
         
         
Electrical Specification        
         
Supply Voltage Vdc 13 12.7 18
Supply Current [TX]4 Amps 0.4    
Supply Current (RX) Ampls 0.3    
         
         
Physical Specifications        
         
Operating Temperature Range     -10 +55
Dimensions [D×W×H]        
MTBF Hours TX: 309, 481
RX: 359, 057
   
         

1.   -25dBm RF input, unity gain, IMD=-40 dBc @ 1 meter Fiber
2.   -25dBm RF Output, IMD=-40dBc
3.   User adjustable
4.   Under 10ºC add 120 mA [laser heating]