Bienvenue chez IK Tech Corporation
Votre guichet unique pour tous vos besoins en satellite

AvL 1050-T 1,4 m SNG Motorisé Tri-Bande FlyAway Trépied Antenne en Bande X

AvL 1050-T 1,4 m SNG Motorisé Tri-Bande FlyAway Trépied Antenne en Bande X

AvL 1050-T 1.4m Military Motorized Tri-Band FlyAway Tripod Antenna 2-port X-band

IKtechcorp is the distributor for AVL Antanna Systems, a leading manufacturer and supplier of commercial satellite equipment. AVL Technologies offers a wide range antennas used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, RF, motorized auto point, vehicle antennas.
• Rx/Tx Feed: 2-Port X-Band Military
- Receive:
7.25 - 7.75 GHz
- Transmit:
7.9 - 8.4 GHz
• Airline Checkable Pack-up
• Tripod-Based
• Key Features
- 15 minute set-up
- Zero Backlash AvL Cable Drive
- Auto-Acquisition Controller

Code produit: avl_1050-t_x

AvL 1050-T 1.4m Military Motorized Tri-Band FlyAway Tripod Antenna 2-port X-band

AvL 1050-T 1.4m SNG/Military Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision X-band Product Picture, Price, Image, Pricing
 
Summary

AvL 1050-T 1.4m Military Motorized Tri-Band FlyAway Tripod Antenna 2-port X-band

AvL's 1050FA case-based positioner FlyAway Military antenna systems offer enhanced-wind tolerance with a compact, rugged and portable package. The 1.4m antenna systems pack into two rugged cases to be shipped anywhere, then set up and operational within minutes.   

AvL’s FlyAway Military antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability.

Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service.

AvL 1050-T 1.4m Military Tripod System feature:
• Commercial airline checkable - packs into two rugged cases
• Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation
• 1.4m Segmented AvL Carbon Fiber Reflector
• Rugged AvL Cable Drive Case-Based Positioner
• Case-Based Positioner (AvL or CFE) or Rugged Tripod Mount
• Offset Prime Focus Highly Efficient Optics
• Available in Ku- (precision or mode-match), X- and Ka-band for commercial or military applications; upgradable to L-Band
• Motorized AvL Cable Drive for reliable positioning
• One button auto-acquisition controller
• Interfaces with all types of RF electronics and satellite services 
• MIL-STD-188-164A Compliant
• 15-Minute Setup

While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation.

AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

 

     
Technical Specifications Diagram    
Inquire

AvL 1050-T 1.4m Military Motorized Tri-Band FlyAway Tripod Antenna 2-port X-band

MECHANICAL SPECIFICATIONS
   
Az/El Drive Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System Motorized Rotation of Feed
Reflector Construction 1.4m Segmented Carbon Fiber
   
Axis Travel
Azimuth ±200°
Elevation (reflector boresight) 5° - 100° of reflector boresight from calibrated inclinometer (El range may vary depending upon CFE)
Polarization ±95°
   
Az/El Speed:
Slewing/Deploying (typical) 2°/sec Elevation: 1°/sec
Peaking (typical) 0.2°/sec
   
Motors 24 VDC Variable Speed, Constant Torque
   
Standard Interfaces:
BUC Mounting Feed boom or behind reflector (additional CFE case or optional case required)
RF Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical 30 ft. cable with connectors for controller
   
Manual/Emergency Drive Handcranks for Az and El, Knob on Pol axis
   
Transit Configuration (Ku-band):  
Two rugged, weather-resistant plastic cases, total weight 260 lbs. (typical)
Positioner 27” x 20” x 22”, 110 lbs. max, 100 lbs. typical
Outriggers/Feed Boom/Reflector 43” x 28” x 21”, 150 lbs. max (Includes Ku or Ka Feed), 140 lbs. typical
Additional Feeds 43” x 28” x 21”, 70 lbs typical, dependent on feed options selected
   
Set-up Time Less than 15 minutes.
 
ENVIRONMENTAL SPECIFICATIONS
   
Wind – Survival 80 mph in zenith position
Wind - Operational: ▼
Without Anchoring 30 mph
With Anchoring 30 mph gusting to 40 mph
   
Pointing Loss in Wind:
Ku-band 0.1 dB typical, 0.5 dB max
Ka-band 0.3 dB typical, 1.0 dB max
X-band 0.1 dB typical, 0.2 dB max
   
Temperature:
Operational -22° to 125° F (-30° to 52° C)
Survival -40° to 140° F (-40° to 60° C)
 
RF / ELECTRICAL SPECIFICATIONS Receive Transmit
     
Feed Type Opt. 2-Port X (Military/WGS) (1.4m Reflector)



Frequency Range (GHz) 7.25 - 7.75 7.9 - 8.4
Polarization Configuration RHCP or LHCP
Gain (mid-band) @ Horn Interface (dBi) 37.6 dBi (less opt. filter) 38.1 dBi (less opt. filter)
-3dB Beamwidth (mid-band) 2.3° 2.1°
Antenna Noise Temperature (midband) 52° K
Radiation Pattern Compliance MIL-STD-188-164A
Maximum Feed Transmit (Tx) Power   1000 watts per port
VSWR 1.30:1 1.30:1
G/T with 50˚ LNB, midband, clear horizon 17.3 dB/°K with 55ºK LNB  
Axial Ratio (CP only, within pointing cone ) 1.21 dB 2.0 dB
Port-to-Port Isolation – Tx to Rx 115 (includes optional filter) 115 (includes optional filter)
 
CONTROLLER SPECIFICATIONS: STANDARD
   
Controller Type Std. Auto-Acquire with Opt. Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface Menu-driven display w/ keypad
Input Power 115/230 VAC (at rack); up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track or TLE track); automatic band sensing
 
CONTROLLER SPECIFICATIONS: OPTIONAL
   
Controller Type Opt. Enhanced Auto-Acquire with Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface Intelligent/simple GUI for on-board or remote CFE laptop
Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing
 
Available Options, Upgrades & Services
 
Optional:
• Standard Configuration: Case-Based
• Optional Configuration: Tripod
• BUC/HPA mounting
• Stabilization leg options
• Waveguide interconnect options
• Beacon Receiver and Inclined Orbit Tracking Mode
• Ku-band Mode Matched Feed (Eutelsat)
• Ku-band Co-pol Kit
• DBS, Commercial Ka Feeds (future)

 
Technical Specifications Diagram
Inquire