| KEY SPECIFICATIONS |
| Product Family | 9000 Series |
| Band | Ka-Band |
| LO Type | PLL |
| # of onboard LOs | Triple-band |
| LO Stability | +/- 50 kHz |
| Noise Figure | 1.6 - 1.8 dB |
| Input Frequency - Band 1 | Ka-Band: 19.20 - 20.20 GHz |
| Input Frequency - Band 2 | Ka-Band: 20.20 - 21.20 GHz |
| Input Frequency - Band 3 | Ka-Band: 21.20 - 22.20 GHz |
| Output Frequency 1 | L-Band: 950 - 1950 MHz |
| Output Frequency 2 | L-Band: 950 - 1950 MHz |
| Output Frequency 3 | L-Band: 950 - 1950 MHz |
| |
| RF SPECIFICATIONS |
| LO Frequency 1 | 18.25 GHz |
| LO Frequency 2 | 19.25 GHz |
| LO Frequency 3 | 20.25 GHz |
| Control Signal 1 | 13 V |
| Control Signal 2 | 13V /22 KHz tone |
| Control Signal 3 | 18 V |
| Phase Noise @ 1KHz offset | -70 dBc/Hz |
| Phase Noise @ 10KHz offset | -78 dBc/Hz |
| Phase Noise @ 100KHz offset | -95 dBc/Hz |
| Conversion Gain | 60 dB typ |
| Input VSWR | 2.5 : 1 |
| Output VSWR | 2.5 : 1 |
| Output P1dB compression point | 5 dBm |
| |
| ELECTRICAL SPECIFICATIONS |
| Power Requirements | 12 - 24 V |
| Current Drain | 400 mA |
| |
| INTERFACE SPECIFICATIONS |
| RF Input Connector | WR-42 waveguide grooved |
| RF Output Connector | N-50 Ohm |
| |
| ENVIRONMENTAL SPECIFICATIONS |
| Temperature - Operational | -40 to +60°C |
| Temperature - Storage | -40 to +80°C |
| |
| PHYSICAL SPECIFICATIONS |
| Dimensions (L x W x H) | 120 x 60 x 45 mm |
| Weight | 400 g |
