SRY-TX-L1-201 ETL StingRay200 AGC L-band Transmit Fibre Converter with Monitor port
Description
Model SRY-TX-L1-201, 200 series StingRay RF over Fibre module is designed to provide compact fibre links up to 10 km.It is a TRANSMIT module that converts an L-BAND (850-2450MHz) signal to optical, and also provides 13/18V LNB POWERING & 22kHz tone. A -20 dB monitor port is available to measure input signal levels.The module has AGC (Automatic Gain Control) with automatic link optimisation for FAST SET-UP.It is designed to be housed in a 200 series indoor or outdoor chassis & works with ETL's receive module SRY-RX-L1-202, SRY-RX-L1-206, SRY-RX-L1-104 and SRY-RX-L1-306.The StingRay RF over Fibre module is available in a variety of RF connector and optical connector types. See below related modules & chassis.
Fibre Connectors
Optical fibre connectors are used to terminate the end of an optical fibre cable and enables quick connection.Angle Polished Connectors
All of the connectors we offer are APC connectors (Angled Physical Contact). APC connectors are used as they provide extremely reliable way of achieving the high return losses essential in RF systems.
APC connectors have the fibre end face polished at an 8-degree angle to prevent light that reflects from the interface from traveling back up the fibre.
Due to the angle of the connector, the reflected light does not stay in the fibre core/cladding but instead leaks out into the cladding. APC connector return loss is around -60 dB.We offer 2 optical fibre connector types that offer low loss and create an extremely reliable connection:
All of the connectors we offer are APC connectors (Angled Physical Contact). APC connectors are used as they provide extremely reliable way of achieving the high return losses essential in RF systems.
APC connectors have the fibre end face polished at an 8-degree angle to prevent light that reflects from the interface from traveling back up the fibre.
Due to the angle of the connector, the reflected light does not stay in the fibre core/cladding but instead leaks out into the cladding. APC connector return loss is around -60 dB.We offer 2 optical fibre connector types that offer low loss and create an extremely reliable connection:
| FC/APC (Angled ferrule connector / fibre connector). Ferrule diameter: 2.5 mm Coupling type: screw |  |
| SC/APC (Angled subscriber connector / square connector / standard connector). Ferrule diameter: 2.5 mm Coupling type: Snap (push-pull coupling) |  |