Welcome to IK Tech Corporation
Your one stop for all your satelite needs

ETL StingRay200 Manual Gain L-band Receive Fibre Converter

Product Code: SRY-RX-L1-274

Description

Model SRY-RX-L1-274, 200 series StingRay RF over Fibre module is designed to provide compact fibre links up to 10 km.

It is a RECEIVE module that converts L-BAND (850-2450MHz) signal to optical, with manual gain for input powers up to 35 dBm.

It is designed to be housed in a 200 series indoor chassis & works with ETL's transmit module SRY-TX-L1-273.

The StingRay RF over Fibre module is available in a variety of RF connector and optical connector types. See below for related modules and chassis.

Fibre Connectors

Optical fibre connectors are used to terminate the end of an optical fibre cable and enables quick connection.

Angle Polished Connectors
_x000D__x000D_ All of the connectors we offer are APC connectors (Angled Physical Contact). APC connectors are used as they provide extremely reliable way of achieving the high return losses essential in RF systems.
_x000D__x000D_ APC connectors have the fibre end face polished at an 8-degree angle to prevent light that reflects from the interface from traveling back up the fibre.


_x000D__x000D_ Due to the angle of the connector, the reflected light does not stay in the fibre core/cladding but instead leaks out into the cladding. APC connector return loss is around -60 dB.

We offer 2 optical fibre connector types that offer low loss and create an extremely reliable connection:

FC/APC (Angled ferrule connector / fibre connector).
_x000D__x000D_ Ferrule diameter: 2.5 mm
_x000D__x000D_ Coupling type: screw
  
SC/APC (Angled subscriber connector / square connector / standard connector).
_x000D__x000D_ Ferrule diameter: 2.5 mm
_x000D__x000D_ Coupling type: Snap (push-pull coupling)