Welcome to IK Tech Corporation
Your one stop for all your satelite needs

AvL 1030-T 1,0m SNG Motorized Tri-Band FlyAway Tripod Antenna Ku-band

AvL 1030-T 1,0m SNG Motorized Tri-Band FlyAway Tripod Antenna Ku-band

AvL 1030-T 1.0m SNG Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

IKtechcorp is the distributor for AVL Antanna Systems, a leading manufacturer and supplier of commercial satellite equipment. AVL Technologies offers a wide range antennas used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, RF, motorized auto point, vehicle antennas.
• Rx/Tx Feed: 2-Port Precision Ku-Band (LP) 
- Receive: 10.95 - 12.75 GHz
- Transmit:
13.75 - 14.50 GHz
• Airline Checkable Pack-up
• Tripod Base
• Key Features
- Zero Backlash AvL Cable Drive
- Auto-Acquisition Controller

Product Code: avl_1030-t_ku

AvL 1030-T 1.0m SNG Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

AvL 1030-T 1.0m SNG / Military Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision Ku-band Product Picture, Price, Image, Pricing
 

Summary

AvL 1030-T 1.0m SNG Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

AvL's 1030-T positioner FlyAway SNG antenna systems offer superior performance in a truly compact, lightweight and portable package. The 1.0m antenna systems are commercial airline checkable (two cases, each weighs <70 lbs) and can be flown or shipped anywhere, then set up and operational within minutes.   
 
AvL’s FlyAway SNG antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability.

Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service

AvL 1030-T 1.0m SNG Systems feature:
• Commercial airline checkable - packs into two cases, each weighs <70 lbs.
• Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation
• 1.0m segmented 6-piece AvL carbon fiber reflector with optional (1.2m) extender panels
• Rugged AvL Cable Drive Case-Based Positioner
• Case-Based Positioner (AvL or CFE) or Rugged Tripod Mount
• Offset Prime Focus Highly Efficient Optics
• Available in Ku (precision or mode-match), X and Ka-band for commercial or military applications
• Motorized AvL Cable Drive for reliable positioning
• One button auto-acquisition controller
• Interfaces with all types of RF electronics and satellite services 
• MIL-STD-188-164A Compliant
• 15-Minute Setup

 

     
Technical Specifications Diagram    
Inquire

AvL 1030-T 1.0m SNG Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

MECHANICAL SPECIFICATIONS
   
Az/El Drive Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System Motorized/Manual Options depending on feed
Reflector Construction 1.0m Segmented 6-Piece AvL Carbon Fiber Reflector
(optional 1.2m segmented 10-piece reflector)
   
Axis Travel
Azimuth ±90°
Elevation (reflector boresight) 0° - 100° (7° - 100° over tripod legs)
Polarization ±95°
   
Az/El Speed:
Slewing/Deploying (typical) Azimuth: 2°/sec Elevation: 1°/sec
Peaking (typical) Azimuth: 0.2°/sec Elevation: 0.2°/sec
   
Motors 24 VDC Variable Speed, Constant Torque
   
Standard Interfaces:
BUC (& other CFE) Mounting Feed boom or behind reflector (additional CFE case or optional case required)
RF Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical 30 ft. cable with connectors for controller
   
   
Electrical Interface Connectors on base
   
Transit Configuration (Ku-band): Tripod-Based
Case 1: Positioner & Feed 31.3” x 20.4” x 15.5” (< 70 lbs)
Case 2: Reflector, Boom, Controls 31.3” x 20.4” x 15.5” (< 70 lbs)
 
ENVIRONMENTAL SPECIFICATIONS
   
Wind – Survival 80 mph in zenith position
Wind - Operational: ▼
Without Anchoring 30 mph
With Anchoring 30 mph gusting to 45 mph
   
Pointing Loss in Wind:
Ku-band 0.7 dB max (1.0m reflector)
Ka-band 2.0 dB max (1.0m reflector)
X-band 1.5 dB max (1.2m reflector with extender panels)
   
Temperature:
Operational -22° to 125° F (-30° to 52° C)
Survival -40° to 140° F (-40° to 60° C)
 
RF / ELECTRICAL SPECIFICATIONS Receive Transmit
     
Feed Type Std. 2-Port Ku



Frequency Range (GHz) 10.95 - 12.75 13.75 - 14.50
Polarization Configuration Linear Orthogonal standard, Optional Co-pol
Gain (mid-band) @ Horn Interface (dBi) 40.0 dBi 41.5 dBi
-3dB Beamwidth (mid-band) 1.8° 1.5°
First Sidelobe Level (typical) -22 dB -22 dB
Antenna Noise Temperature (midband) 54° K at 11.85 GHz
Radiation Pattern Compliance FCC § 25.209, ITU-R S.580.6
Maximum Feed Transmit (Tx) Power   500 watts per port
Maximum Allowable Power   -14dBw/4kHz (per FCC) -0dBw/4kHz (per ITU)
VSWR 1.30:1 1.30:1
G/T with 50˚ LNB, midband, clear horizon 19.6 dB/K  
     
Cross-Polarization Isolation (Ku only):    
On Axis (minimum) 35 dB 35 dB
Off Axis ( in 1 dB BW) 28 dB 30 dB
     
Feed Port Isolation – Tx to Rx (dB) 35 dB 85 dB
 
CONTROLLER SPECIFICATIONS: STANDARD
   
Controller Type Std. Auto-Acquire with Opt. Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface Menu-driven display w/ keypad
Input Power 115/230 VAC (at rack); up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track or TLE track); automatic band sensing
 
CONTROLLER SPECIFICATIONS: OPTIONAL
   
Controller Type Opt. Enhanced Auto-Acquire with Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface Intelligent/simple GUI for on-board or remote CFE laptop
Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing
 
Available Options, Upgrades & Services
 
Optional:
• Upgrade from 2-Port Precision Ku Feed to:
a) 2-Port Enhanced Cross-Pol (Mode-Matched) Ku;
b) 2-Port X MIL;
c) 2-Port Ka
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Spare parts kit
• Custom pack-ups

 
Technical Specifications Diagram
Inquire