Welcome to IK Tech Corporation
Your one stop for all your satelite needs

AvL 1810 Premium SNG 1.8m Motorized Vehicle-Mount Satellite Antenna Ka-Band Commercial

AvL 1810 Premium SNG 1.8m Motorized Vehicle-Mount Satellite Antenna Ka-Band Commercial

AvL 1810 Premium SNG 1.8m Motorized Transportable Vehicle-Mount Satellite Antenna 2-Port Ka-Band Commercial

IKtechcorp is the distributor for AVL Antanna Systems, a leading manufacturer and supplier of commercial satellite equipment. AVL Technologies offers a wide range antennas used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, RF, motorized auto point, vehicle antennas.

• Rx/Tx Feed: 2-port Ka-Band Commercial
- Receive: 17.7 - 20.2 GHz
- Transmit:
27.5 - 30.0 GHz
Stows to 17.7" H (45 cm H)
• Key Features
- High precision azimuth bearing
- 3-Axis Jog Controller w/ Auto-Stow
- Zero backlash AvL Cable Drive 
- 400° Az & 0-90° El Movement
Product Code: avl_1810_ka_premium_com

AvL 1810 Premium SNG 1.8m Motorized Transportable Vehicle-Mount Satellite Antenna 2-Port Ka-Band Commercial

AvL 1810 Premium SNG / Military 1.8m Motorized Transportable Vehicle-Mount Satellite Antenna 2-Port Ka-Band Commercial Product Picture, Price, Image, Pricing


AvL 1810 Premium SNG 1.8m Motorized Transportable Vehicle-Mount Satellite Antenna 2-Port Ka-Band Commercial

AvL's 1.8m vehicle-mount / drive away SNG antenna systems offer strong performance in a small, lightweight and low-profile package. The 1.8m antenna systems offer standard Ku-band, with L- and X-band optional. The antennas feature integrated GPS and level sensors for automatic vehicle tilt compensation.    

AvL’s SNG antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability. Typically these antennas are used in signal contribution for high data rate and bandwidth as well as high power broadcast or similar applications.

AvL 1810 Ka-Band Vehicle-Mount Premium SNG Antenna Systems feature:
• Non-load-bearing 1.8m AvL carbon fiber single-piece reflector with surface treatment for Ka-band
• High-precision azimuth bearing
• Integrated backing structure for minimized stow height
• Wide booms to allow larger HPA envelope
• Jog control or fully automatic auto-acquisition controllers
• Feed options for Ku-, Ka- and X-band; optional C-band for international
• RF electronic mounting either on feed boom, back of reflector, base, or inside vehicle
• 25ft (8m) RG59 coax and controller interconnect cables
• Zero backlash AvL Cable Drive with 400° Az & 0-90° El movement
• Stows to 17.7" H (45 cm H)
• Optional saddlebag mount for larger HPAs
• High-torque elevation motor
• Through-pedestal cross-axis waveguide kit
• Optional Transmit Rotary Joint on Feed
• Limited function 3-axis jog controller with auto-stow
• Optional aerodynamic cowlings
• Aerodynamic cowling is available


Technical Specifications Diagram    

AvL 1810 Premium SNG 1.8m Motorized Transportable Vehicle-Mount Satellite Antenna 2-Port Ka-Band Commercial

Az/El Drive Motorized Zero Backlash AvL Cable Drive (Patent Pending)
Polarization Drive System Motorized Worm Drive
Reflector Construction 1.8m Single Piece AvL Carbon Fiber
Axis Travel
Azimuth Standard: 400°;   Optional dual waveguide through pedestal: 270°
- Mechanical 0-90° antenna boresight
- Electrical Standard limits at 5° to 65° (CE Approval) or 5° to 90°
Polarization ±95° for 2-port and 3-port Ku-Band Feeds;   ±50° (100º Effective) for Dual Ku-Band, 4-port
Az/El Speed
Slewing/Deploying (typical) 2°/second
Peaking (typical) 0.1°/second
Motors 24 VDC Variable Speed, Constant Torque
RF Interface
BUC Mounting Feed boom (100 lbs.;   Max BUC envelope: 30 L x 22 W x 9 H inches (76 L x 56 W x 23 H cm)) orinside truck
Axis Transition Twist-flex or optional rotary joints for Ku-Band;   Pol rotary joint standard for C-Band
Waveguide WR75 Cover Flange at Interface Point
Coax RG59 run from feed to base plus 25 ft. (8m)
Electrical Interface 25 ft. (8 m) Cable with Connectors for Controller
Manual/Emergency Drive Handcrank on Az, El and Pol axes, leads from 12VDC Pol Motor
Weight 295 lbs. (134 kg)
Stowed Dimensions 100 L x 71.4 W x 18.2 H inches (254 L x 181 W x 46.2 H cm); H with opt. controller: 19.3 in (49cm)
Time to Acquisition Less than 15 minutes, 8 minutes typical
Mounting Optional pallet for vehicle roof mounting
Wind - Survival Deployed: 80 mph (128 kph); Stowed: 125 mph (201 kph)
Wind - Operational 30 mph (48 kph), Gusts to 45 mph (72 kph)
Pointing Loss in Wind (Ku RX): ▼
20 mph (32 kph) 0.1 dB typical
30 mph gusting to 45 mph 0.5 dB typical

(48 kph gusting to 72 kph)
Operational -22° to 125° F (-30° to 52° C)
Survival -40° to 140° F (-40° to 60° C)
Feed Type Ka-Band
Frequency Range (GHz) 17.7 - 20.2
27.5 - 30.0
Polarization Configuration CP or LP
Gain (mid-band)

2-Port Feed 50.0 dBi 53.0 dBi
-3dB (Degrees) 0.6 0.4
-10 dB (Degrees) 1.0 0.7
Radiation Pattern Compliance FCC §25.209, MIL-STD-188-164A
First Sidelobe Level (typical) (dB)

Antenna Noise Temperature (midband) 108° K @ 20° El
G/T, midband, clear horizon 26.8 dB/˚K w/ 100°K LNB
Axial Ratio (CP only, within pointing cone) (dB) 1.5 1.0
Cross-Polarization Isolation (dB)

On-Axis 35 35
Off-Axis (within pointing cone) 30 30

Power Handling Capability
250 watts per Port
Feed Port Isolation - Tx to Rx (dB) 80 dB 80 dB   (incl. opt. filter)
Controller Type Three-axis Jog Control & Display with Auto-Stow
Optional Upgrades
Semi-automatic Operation Drive to calculated position based on operator entered vehicle location, heading, plus satellite (longitude or listed)
Automatic Operation Drive to calculated position based on auto GPS and Flux-Gate Compass data & satellite peaking w/ LNB signal
Auto-acquisition One-button acquisition of selected satellite including peaking and optimization of cross-pol (certified for auto- commissioning on most satellite services)
Size Two Rack Units for Semi-automatic & Automatic Controllers
Input Power 110/240 VAC, 1 phase, 50/60 Hz, 10/5 A peak, 1 A continuous
Optional Controller AvL AAQ
Features AvL one button auto-acquisition of selected satellites, including peaking and optimization of cross pol.   Internal movement detector and automatic stow.   Includes a hand-held control and separate power supply.   Certified for auto- commissioning on most satellite services.
Size Embedded ACU with separate1 RU power supply
Input Power 100 - 240 VAC 50/60 Hz   4 A peak, 300 W power supply
Available Options, Upgrades & Services
• Upgrade Feed to 3- or 4-Port Ku-Band, 2-Port C-Band, 4-Port Ka-Band, or 2-Port X-Band
• Optional H/V switch (Ku Wideband)
• Optional Rotary Joint on Pol Axis with opt. Flex W/G to BUC
• Mounting Pallet (adds 4.5” (11.4 cm) to stow height)
• Add BUC/HPA Mounting (NOTE: minimum elevation may be restricted by these options)
• Upgrade to Custom RF/IF I/O cabling configurations available
• Custom Colorization (contact factory for available colors)
• Add Custom Logo on Reflector Face (1- or 2-Color; per AvL Logo Policy)
• Spare Parts Kit
Technical Specifications Diagram
Compliance Standard