Welcome to IK Tech Corporation
Your one stop for all your satelite needs

AvL 2020FA 2.4m SNG Motorized Quad-Band FlyAway Antenna Ku-Band

AvL 2020FA 2.4m SNG Motorized Quad-Band FlyAway Antenna Ku-Band

AvL 2020FA 2.4m SNG Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

IKtechcorp is the distributor for AVL Antanna Systems, a leading manufacturer and supplier of commercial satellite equipment. AVL Technologies offers a wide range antennas used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, RF, motorized auto point, vehicle antennas.
• Rx/Tx Feed: 2-Port Precision Ku-Band (LP) 
- Receive: 10.95 - 12.75 GHz
- Transmit:
13.75 - 14.50 GHz
- Standard Cross-Pol comp.
• Opt. Rx/Tx Feed:
2-Port Mode-Matched Ku-Band (CP)
Four or five rugged cases
• 2020 Case-Based Positioner
• Key Features
- Two-Man Lift & Carry
- Quad-band feed capability
- Enhanced wind tolerance
- Auto-Acquisition Controller
- 15-Minute Setup

Product Code: avl_2020fa_2.4m_ku

AvL 2020FA 2.4m SNG Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

AvL 2020FA 2.4m SNG / Military Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band Product Picture, Price, Image, Pricing
 

Summary

AvL 2020FA 2.4m SNG Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

AvL's Model 2.4m 2020 FlyAway SNG antenna system offers strong performance in a lightweight, rugged, portable, 2-man lift package that packs into four cases. All 2020FA FlyAway SNG antenna systems have positioners integrated into cases for easy set-up; these antennas can be flown anywhere, then set up and operational within minutes.

AvL’s FlyAway SNG antennas  are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability.

Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service.

AvL 2020FA Ku-Band 2.4m SNG Systems feature:
• Packs into four or five cases depending on options selected; positioner is integrated into one case for stability and ease of set-up
• 2.4m Segmented 9-piece Carbon Fiber Reflector
• 2-man lift
• 2220 Rugged/Heavy Duty Case-Based Positioner
• Quad-band feed capability:
-Ku-Band (LP)
-Ka-Band (LP or CP)
-X-Band (CP)
-C-Band (LP or CP) available for some international locations
• Zero Backlash Az/El drive system with patented AvL Cable Drive Positioner
• Elevation over azimuth mount geometry
• Polarization adjustment by motorized rotation of linear feeds
• Case-based systems with the positioner integrated into one case for stability and ease of set-up
• Fully compliant for FCC and Intelsat; Eutelsat compliance optional
• One button auto-acquisition controller
• 15-Minute Setup

 

     
Technical Specifications Diagram    
Inquire

AvL 2020FA 2.4m SNG Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

MECHANICAL SPECIFICATIONS
   
Az/El Drive Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System Motorized Rotation of Feed
Reflector Construction 2.4m Segmented 9-piece Carbon Fiber Reflector
   
Axis Travel
Azimuth ±200°
Elevation (operational) 0° - 90° with ±200° Az Travel
Polarization (LP feeds) ±95° Adjustable within <1°
   
Az/El Speed:
Slewing/Deploying (typical) 2°/sec Elevation: 1°/sec El
Peaking (typical) 0.2°/sec
   
Motors 24 VDC Variable Speed, Constant Torque
   
Standard Interfaces:
BUC Mounting Feed boom or behind reflector (additional CFE case or optional case required)
RF Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical 30 ft. cable with connectors for controller
   
Manual/Emergency Drive Handcranks for Az and El, Knob on Pol axis
   
Transit Configuration:  
Four or five rugged, weather-resistant plastic cases
2020 Motorized Positioner 26" x 24" x 30", 170 lbs
Outriggers/Feed Boom/Ku or Ka Feed 44 x 44 x 18 inches, 150 lbs.
(112 x 112 x 46 cm, 68 kg), includes Ku or Ka feed
Reflector Panels (2 cases) 44 x 44 x 18 inches, 150 lbs. each
(112 x 112 x 46 cm, 68 kg each)
Additional Feeds 43 x 28 x 21 inches, 70 lbs. (109 x 71 x 53 cm, 32 kg) typical, dependent on feed options selected (optional)
Set-up Time Less than 15 minutes.
 
ENVIRONMENTAL SPECIFICATIONS
   
Wind – Survival 80 mph in zenith position
Wind - Operational: ▼
Without Anchoring 30 mph
With Anchoring 30 mph gusting to 45 mph
   
Pointing Loss in Wind:
Ku-band 1.3 dB typical, 2.4 dB max
Ka-band 1.0 dB typical, 2 dB max, 20 mph gusting to 30 mph
   
Temperature:
Operational -22° to 125° F (-30° to 52° C)
Survival -40° to 140° F (-40° to 60° C)
 
RF / ELECTRICAL SPECIFICATIONS Receive Transmit
     
Feed Type Std. 2-Port Precision Ku
DBS bands available upon request



Frequency Range (GHz) 10.95 - 12.75 13.75 - 14.50
Polarization Configuration Orthogonal Linear, Optional Copol Linear
Gain (mid-band) @ Horn Interface (dBi) 47.0 dBi 48.8 dBi
VSWR 1.30:1  
-3dB Beamwidth (midband) 0.7° 0.6°
Antenna Noise Temperature (midband) 61° K
Radiation Pattern Compliance FCC 25.209, ITU-R S.580-6, IESS 208
Maximum Feed Transmit (Tx) Power   500 watts per port
G/T with LNB, midband 26.5 dB/° K (with 50° K LNB)  
     
Cross-Polarization Isolation:    
On-axis within pointing cone 35 dB 35 dB
Within pointing cone Std: 28 dB MM: 25 dB Std: 30 dB MM: 35 dB
Linear Cross-Pol Isolation (in pointing cone) option option
Feed Port Isolation – TX to RX (dB) 35 80 (includes filter)
     
 
CONTROLLER SPECIFICATIONS: STANDARD
   
Controller Type Std. Auto-Acquire with Opt. Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface Menu-driven display w/ keypad
Input Power 115/230 VAC (at rack); up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track or TLE track); automatic band sensing
 
CONTROLLER SPECIFICATIONS: OPTIONAL
   
Controller Type Opt. Enhanced Auto-Acquire with Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface Intelligent/simple GUI for on-board or remote CFE laptop
Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing
 
Available Options, Upgrades & Services
 
Optional:
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Controller options – see above
• Spare parts kit

 
Technical Specifications Diagram
Inquire