MITEC C-Band High Power BUC 60-400W
Mitec’s products have more than a quarter century of proven field experience, demonstrating their unmatched dependability and reliability day after day.
This level of dependability can be found in our line of high power block upconverters. Uniquely designed to be a high quality but cost effective solution for the VSAT market, this high power BUCs set the standard for the satellite industry.
- Easy to install
- No indoor equipment required
- Available in Standard, Low Extended, Super Extended, Palapa and Insat bands
- High thermal dissipation efficiency resulting in “Best in Class” Mean Time Before Failure (MTBF)
- Superior phase noise, compliant to IESS 308 /309
- Redundancy option for 1:1 and 1:2 configuration available
- Built-in facilities for critical parameters such as , RF power detection, Mute control, over temperature shutdown, summary alarm
- RS485, RS232, or Analog M&C interface
- Auto ranging power supply
MAIN CHARACTERISITICS OF 60 – 400W C-BAND BUCs | ||||||||||||
Power (W) | 60 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 400 | |||
Power (P1 dB) min.(dBm) | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | |||
Power Consumption (W) | 500 | 600 | 750 | 800 | 900 | 1000 | 1100 | 1800 | 2000 | |||
Power Voltage (VAC) | Auto Ranging 90 – 265 VAC | 190 -265 VAC | ||||||||||
Dimensions (L x W x H, inches) | 30 x 8 x 12 | 22 x 10 x 12 | 24 x 18 x 15 | |||||||||
Weight (kg/lbs) | 12/27 | 17/37 | 45/110 | |||||||||
Output Frequency Range | 5.850 to 6.425 GHz (other frequency range options available) | |||||||||||
Input Frequency Range | 950 to 1525 MHz (other frequency range options available) | |||||||||||
Conversion Type | Single, fixed L.O., Non-inverting | |||||||||||
Linear Gain | 70 dB min. | |||||||||||
TX Gain Stability over temperature range | 3.0 dB p-p nominal; 4.0 dB max. | |||||||||||
TX Gain Variation | 1.0 dB p-p max over 36 MHz; 2 dB p-p over full band | |||||||||||
Intermodulation | -26 dBc, with 2 equal carriers at 3 dB total power back off from rated power | |||||||||||
10 MHz Reference (via IF Connector) | 0 dBm +/- 5 dB, (internal reference, optional) | |||||||||||
L.O. Phase Noise | Meets IESS 308 | |||||||||||
Input IF Impedance | 50 Ohms (75 Ohms optional) | |||||||||||
Mute Internally Built | Shut off BUC in case of L.O. unlocked | |||||||||||
Status LED | Bicolor: RED - Alarm; GREEN - Operational |