Welcome to IK Tech Corporation
Your one stop for all your satelite needs

Foxcom Platinum PL7130T1550 / PL7130R20 , 10MHz Reference RF Link High Power Input, 20 dB Optical Budget

Foxcom Platinum PL7130T1550 / PL7130R20 , 10MHz Reference RF Link High Power Input, 20 dB Optical Budget

Foxcom Platinum PL7130T1550 / PL7130R20 , 10MHz Reference RF Link High Power Input, 20 dB Optical Budget

IKtechcorp is the distributor for Foxcom Communications Fiber Optic Systems, a leading manufacturer and supplier of commercial satellite equipment. Foxcom offers a wide range fiber links used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, optical, fiber optic, RF.

• Designed to transfer 10MHz reference sine signals
• Equipped with 2nd harmonic filter to improve performances
• Powerful management capabilities via a front panel LCD and rack mounted SNMP
• Variety of RF and optical connectors
• More than 70Km distance
Product Code: Foxcom_PL7130R20

Foxcom Platinum PL7130T1550 / PL7130R20 , 10MHz Reference RF Link High Power Input, 20 dB Optical Budget

Foxcom Platinum PL7130T1550 / PL7130R20 , 10MHz Reference RF Link High Power Input, 20 dB Optical Budget
 

Summary

Foxcom Platinum PL7130T1550 / PL7130R20 , 10MHz Reference RF Link High Power Input, 20 dB Optical Budget

Foxcom’s Platinum 10MHz card is designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With high RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 20dB optical budget with the R20 receiver. 

Utilizing Foxcom’s DigiRF technology, the user has full control of all important functions for setup, operation, and analysis via the front panel LCD or via the associated subrack SNMP capability.

Each low profile individual transmitter or receiver can be “hot swapped” in the chassis maintaining a best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications.

The PL7130T1550 transmitter and PL7130R20 receiver are designed for subrack chassis mounting. The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required.

 

     
Order Diagram - Options    
Foxcom Gold Series Order Diagram - Options

Foxcom Platinum PL7130T1550 / PL7130R20 , 10MHz Reference RF Link High Power Input, 20 dB Optical Budget

 


RF Specifications Units Typical Minimum Maximum
         
Frequency Range - Bandwidth MHz 10    
Amplitude Response @ Unity Gain
5 ± 1 MHz

dB

±0.2
 
±0.25
Gain Stability dB/24hr ± 0.2   ± 0.25
Gain Slope dB     +1.0
Gain Variation over temperature dB   -2 2
DR (Dynamic Range - single channel)1 dB     30
Noise Figure (NF)2 dB 58    
Input/Output Impedance Ohm 50 or 75    
1 dB Compression Point dBm 2   3
Phase Noise3 dBm None    
Input Signal Range - Total Power dBm   -25 0
Maximum Input without Damage dBm     +15
Output Signal Range [total power]4 dBm   -25 +5
TX/RX Input/Output Return Loss
50 Ohm
75 Ohm
dB
-18
-15
 
-18
-15
Test Port [front panel sample port] dB -20 -22 -18
RF Connector
Input/Output
Test Port
F, SMA, BNC, N
F, BNC
         
         
Optical Specifications Units Typical Minimum Maximum
         
Optical Wavelength nm 1550    
Optical Power Output mW / dBm 2 / 3    
Optical Budget / Distance dBm/Km 1550 nm / 40    
RX Optical Input Power dBm -16 -17 -7
Optical Connector Type FC/APC or SC/APC
(E2000 option)
-  
Optical Return Loss dB   -60 -55
         
         
Electrical Specifications        
         
Supply Voltage Vdc 12    
Supply Current [TX]5 Amps 0.5    
Supply Current (RX) Amps 0.45    
EMI Rating   EMI Rating: FCC Class B
CE Mark
   
         
         
Physical Specifications        
         
Operating Temperature Range ºC   -10 +55
Storage Temperature Range ºC   -45 +85
Relative Humidity   95% non-condensing    
Altitude ft / Km 10,000 [3.08 ] operating6
14,000 [12.2] non-operating
   
Dimensions [D×W×H] ins/cm 12×0.8×4 / 30.5×2×10.2    
Weight lbs./Kg 0.5 / 0.23    
MTBF Hours TX: 309,481
RX: 359,057
   
MTTR Hours 0.083    
Shock & Vibration  

Designed for normal transportation environment per section 514.4 MIL-STD-810E. Designed to withstand 20G at 11 ms [½ sine pulse] in non-operating configuration.

     

1.   User adjustable
2.   -5 dBm RF input, link gain = 10 dB, single tone@ -17dBm optical input 
3.   Direct modulation utilized
4.   Alarm trip point: RED +7 dBm, AMBER -28 dBm
5.   Under 10º add 120 mA fot TX [laser heating]
6.   WIth standard adiabatic derating at 2ºC/1000ft. [0.3 Km.]