Welcome to IK Tech Corporation
Your one stop for all your satelite needs

VIKING FLT-MFC7893D Terrestrial Interference C Band WiMAX/Radar Elimination Filter (3,7 – 4,2 GHz)

VIKING FLT-MFC7893D Terrestrial Interference C Band WiMAX/Radar Elimination Filter (3,7 – 4,2 GHz)

VIKING FLT-MFC7893D Terrestrial Interference C Band WiMAX/Radar Elimination Filter (3.7 – 4.2 GHz)

IKtechcorp is the distributor for Viking SATCOM, a leading manufacturer and supplier of commercial satellite equipment. Viking SATCOM offers a wide range of products used in the VSAT, DTH, COTM, Mobile, TVRO, Educational, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, earth station, RF, prodelin, motorized auto point, vehicle antennas. Also featuring beacon receivers, de-icing systems, dehydrators, feeds, filters, mountss, redundant systems, snow covers etc.

Viking SATCOM is a leading manufacturer and distributor of commercial satellite communication Receive-Only antennas. Viking Satcom offers a “One Stop Shop” approach by offering and delivering state of the art satellite antennas. A complete line of products, communication systems, and accessories are available at cost effective prices.


Product Code: VIKING_FLT-MFC7893D

VIKING FLT-MFC7893D Terrestrial Interference C Band WiMAX / Radar Elimination Filter (3.7 – 4.2 GHz)

VIKING FLT-MFC7893D TI Filters, C Band WiMAX / Radar Elimination (3.7 – 4.2 GHz) Product Picture, Price, Image, Pricing
 

Summary

VIKING FLT-MFC7893D Terrestrial Interference C Band WiMAX / Radar Elimination Filter (3.7 – 4.2 GHz)

Historically, the solution for eliminating out-of-band interference (e.g. RADAR) has been to install a highly-selective bandpass filter. Specifically, a filter with a passband corresponding to that region's standard footprint (i.e. 3700-4200 MHz, 3400-4200 MHz, etc.)

However, not long ago, WiMAX began operating in the 3400-3800 MHz frequency band in many regions around the world. This common band operation causes in-band interference at C-Band receive sites that cannot be eliminated with "standard footprint" BPFs.

Example: WiMAX - operating at 3700 MHz - causes interference at C-Band receive site (where the footprint is 3700-4200 MHz). A standard footprint BPF will pass all frequencies from 3700 to 4200 MHz (i.e. - Including the WiMAX signal).

Solution: Install 7893D-3780/4200 bandpass filter that will provide 30db rejection at 3700 MHz and will pass all remaining C-band from (3780-4200) MHz.

VIKING FLT-MFC7893D Feature:
• C Band Terrestrial Interference Filters
• Helps Eliminate WiMAX or RADAR interference
• Material:  Copper Body and Brass Flanges
• Low Insertion Loss
• Low Group Delay Variation
• Compact Size
• Passband Options: 
- 3.7 - 4.2 GHz (FLT-MFC-7893D)
- 3.4 - 4.2 GHz (FLT-MFC-7893D-3400/4200)
- 3.665 - 4.165 GHz (FLT-MFC-7893D-3665/4165)
- 3.740 - 4.160 GHz (FLT-MFC-7893D-3740/4160)
- 3.780 - 4.200 GHz (FLT-MFC-7893D-3780/4200)
- 3.900 - 4.200 GHz (FLT-MFC-7893D-3900/4200)

 

     
Technical Specifications Diagram    
See "Specifications" Tab

VIKING FLT-MFC7893D Terrestrial Interference C Band WiMAX / Radar Elimination Filter (3.7 – 4.2 GHz)

 

TYPICAL SPECIFICATIONS

 
   

Passband

3.7 - 4.2 GHz

Insertion Loss

>1.0 dB Typ.

Group Delay Variation 8nS Max

Rejection

25 dB @ 3650 MHz and 4250 MHz
60/70 dB @ 3550 MHz and 4350 MHz
70/80 dB @ 3500 MHz and 4400 MHz
Tx Band (5800 - 6725MHz) >70dB Typ.

Finish Gray Lacquer
* Half gasket is supplied with each model.
 

Technical Specifications Diagram

 

VIKING FLT-MFC7893D TI Filters, C Band WiMAX / Radar Elimination (3.7 – 4.2 GHz) Product Picture, Price, Image, Pricing Mechanical Diagram

 
VIKING FLT-MFC7893D TI Filters, C Band WiMAX / Radar Elimination (3.7 – 4.2 GHz) Product Picture, Price, Image, Pricing Mechanical Diagram
 

Compliance Standard

Inquire