Welcome to IK Tech Corporation
Your one stop for all your satelite needs

ETL StingRay200 series High Gain AGC L-band Receive Fibre Converter with Mon port

ETL StingRay200 series High Gain AGC L-band Receive Fibre Converter with Mon port
Product Code: SRY-RX-L1-242

Description

Model SRY-RX-L1-242, 200 series High Gain StingRay RF over Fibre module is designed to provide additional gain, increasing the optical link budget from 4 to 14 dB.

It is a RECEIVE module that converts an optical signal to L-BAND (850-2450MHz).

The module has AGC (Automatic Gain Control) for FAST SET-UP.

It is designed to be housed in a 200 series indoor or outdoor chassis and work with a range of ETL's transmit fibre modules for standard links (up to 10km), CWDM (up to 50km) and DWDM (up to 500km) systems.

The StingRay RF over Fibre module is available in a variety of RF connector and optical connector types. See below for related modules & chassis.

Fibre Connectors

Optical fibre connectors are used to terminate the end of an optical fibre cable and enables quick connection.

Angle Polished Connectors
_x000D__x000D_ All of the connectors we offer are APC connectors (Angled Physical Contact). APC connectors are used as they provide extremely reliable way of achieving the high return losses essential in RF systems.
_x000D__x000D_ APC connectors have the fibre end face polished at an 8-degree angle to prevent light that reflects from the interface from traveling back up the fibre.

Due to the angle of the connector, the reflected light does not stay in the fibre core/cladding but instead leaks out into the cladding. APC connector return loss is around -60 dB.

We offer 2 optical fibre connector types that offer low loss and create an extremely reliable connection:

FC/APC (Angled ferrule connector / fibre connector).
_x000D__x000D_ Ferrule diameter: 2.5 mm
_x000D__x000D_ Coupling type: screw
  
SC/APC (Angled subscriber connector / square connector / standard connector).
_x000D__x000D_ Ferrule diameter: 2.5 mm
_x000D__x000D_ Coupling type: Snap (push-pull coupling)